PCI coal: under high pressure

PCI coal: under high pressure

PCI coal in steelmaking ‘can give way to green hydrogen’

An early use of green hydrogen in the steel industry will be in existing blast furnaces to replace pulverised coal injection (PCI) coal, says a new report

01 June 2022

Steel-making companies are exploring replacing Russian and Australia’s increasingly expensive and supply-challenged pulverised coal injection (PCI) coal with green hydrogen as an early pathway to reducing emissions in the steel industry, finds a new report from the Institute for Energy Economics and Financial Analysis (IEEFA).

PCI (pulverised coal injection) coal is essentially high-quality thermal coal which can be sold into metallurgical or thermal coal markets alike. It’s injected into historically dominant blast furnaces to reduce more expensive coking coal consumption.

Russia supplies virtually all of Europe’s low-sulphur PCI coal and the European Union ban on Russian coal imports – to take effect from August 2022 – will clearly have a major impact on this trade. Australia is the only other major supplier of PCI coal but is unlikely to be able to make up for lost Russian supplies.

Australian PCI coal prices peaked at $645/tonne in March 2022, briefly surpassing that of premium-quality hard coking coal -- PCI coal is more usually priced 20per cent-30per cent lower. Even after coming off this extreme high, PCI coal was still at a very high $365/t in early April.

Report author, energy finance analyst Simon Nicholas says globally, the steel industry is exploring the potential for hydrogen while facing escalating coal prices.

“This is presenting challenges for the future of Australia’s PCI and coking coal,” says Nicholas, “particularly with opportunities for hydrogen apparent in the short term in blast furnaces and longer-term in direct reduced iron processes.”

A number of companies are already exploring the replacement of PCI coal with hydrogen:

  • German conglomerate Thyssenkrupp started the first industrial-scale test of PCI coal replacement with hydrogen in 2019.
  • Australia’s largest steelmaker BlueScope plans to replace PCI coal with coke oven gas, which contains 60per cent hydrogen, subsequently adding green hydrogen. The company aims to work with Australia’s Commonwealth Scientific and Industrial Research Organisation (CSIRO) and Shell on pilot green hydrogen production projects.
  • BHP, having indicated hydrogen will replace PCI coal in blast furnaces, is holding onto its hard coking coal assets and has started divesting mines that produce lower-quality metallurgical coal including PCI coal.
  • Rio Tinto has highlighted that reducing carbon emissions from blast furnaces will require higher-grade iron ore and the replacement of PCI coal with hydrogen, echoing the view that PCI coal is facing an increasingly challenged future.

Australia is the world’s largest exporter of metallurgical coal, shipping 167 million tonnes in 2021.

Nicholas says Australian thermal coal mine developers often suggest that a percentage of their proposed product will be sold as PCI coal, despite there being no certainty that any output from a proposed mine will be sold into the metallurgical coal market.

“With an increasing number of banks and other financial institutions ending their financing of thermal coal, it is useful to thermal coal miners to suggest that new mine developments will produce metallurgical, as well as thermal, coal,” he says.

“By maintaining that new mine projects will produce metallurgical coal, developers can suggest such mines are less exposed to energy technology change. Low carbon steelmaking technology is not yet at the advanced stage of development as wind and solar power, which are now mature, low-cost alternatives to generation using thermal coal.

“However, the outlook for PCI coal is now looking increasingly challenged by technological change just as renewable energy has impaired thermal coal’s long-term outlook.”

Major steelmakers increasingly are committing to reach net zero emissions by 2050.

Modelled scenarios foresee a significantly greater role for low- and zero-emissions steelmaking processes such as scrap steel recycling and direct reduced iron (DRI), which can use green hydrogen instead of the metallurgical coal consumed by currently-dominant blast furnace technology -- 70per cent of the world’s steel is produced via this method.

“Many steelmakers are prioritising the reduction of emissions at existing blast furnaces,” says Nicholas, “rather than immediately shifting production to DRI processes.

“As such, an early use of hydrogen in steelmaking will be in the replacement of PCI coal. This is not a route to full decarbonisation – the replacement of PCI with green hydrogen reduces blast furnace carbon emissions only by 20per cent.”

Wood Mackenzie sees PCI coal coming under particularly high pressure in a 2-degCelsius scenario with demand falling 50 per cent. However, Wood Mackenzie’s scenario depends on a high roll-out of as yet unproven carbon capture and storage (CCS) technology. In the event that such a CCS uptake does not occur, emissions reductions via other methods would need to be increased to remain in line with 2˚C and PCI coal consumption would need to drop even further.

The war in Ukraine is yet another factor.

“At this stage of the global energy transition high coal prices – as well as energy security concerns – are only likely to accelerate a transition towards alternative technology,” says co-author of the report Soroush Basirat.

“The current high – but declining – cost of producing green hydrogen will seem less of an issue in a very high PCI cost environment.”


Key takeaways:

  • Use of green hydrogen considered a promising way to decarbonise steel
  • An early use of green hydrogen in the steel industry will be in existing blast furnaces to replace pulverised coal injection (PCI) coal.
  • Russia supplies virtually all of Europe’s PCI coal. Australia as the only other major supplier is unlikely to be able to make up for lost Russian supplies.
  • To reduce emissions, steelmakers are slowly starting to shift from blast furnaces to low- and zero-emissions steelmaking processes that don’t use coal.
  • PCI coal will be the first grade of metallurgical coal impacted by the decarbonisation of steel.
  • PCI coal is facing an increasingly challenged future with Rio Tinto, BHP, BlueScope and Thyssenkrupp highlighting and exploring alternative options to its use.


More Stories